Typ HD mit elektrischem Ausgang, keramischer Sensor ohne Übertragungsflüssigkeit
Process connection: In-Line 3/8”, 1/2”, 3/4”, 1” and 1 1/4” flare, dead-end 1/4”, 3/8” and 1/2” flare, panel mount, dead-end 1/4 NPT female Signal output: 4 ... 20 mA, 2-wire system Power supply: DC 24 V (DC 12 ... 30 V supply voltage) Accuracy: ± 0.5% of span for precise and reliable process control (includes combined effects of hysteresis and linearity) Pressure ranges: 0 ... 2.5 bar (0 ... 30 psi), 0 ... 4 bar (0 ... 60 psi), 0 ... 6 bar (0 ... 100 psi) or other equivalent units Overpressure limit: Maximum process pressure is limited by pressure-temperature rating of the process connection (see diagram page 3) Operating temperature: Ambient: +5 ... +60°C, Media: +5 ... +80°C, Storage: -20 ... +60°C Electrical connection: 5 m flying lead (IP 67) Material: Wetted parts: PFA or TFM (modified PTFE) Other non-wetted parts: PVDF, EPDM, Viton Cable: FEP jacketed Sensing element: Non-metallic ultra-pure-ceramic sensor totally isolated from process media by vented three layer PFA diaphragm assembly (approved and patented Hydra-technology) Fill fluid: No fill fluid which avoids possible process contamination Cleaning and packaging: Production of all wetted parts, cleaning, assembly, calibration and packaging are done in a class 100 cleanroom